Render Technology Solutions deal with all kinds of Euchner Non-contact safety switch in India
Can be adjusted in 90° steps
The device may be operated only in conjunction with the actuator CET-A-....
Important: The actuator must be ordered separately.
Each actuator is unique. The switch detects only taught-in actuators. Additional actuators can be taught-in. Only the last actuator taught-in is detected.
|CET3||Closed-circuit current principle, guard locking by spring force. Release by applying voltage to the guard locking solenoid. The door position is also monitored. The door monitoring output OUT D is set to HIGH as soon as the actuator is above the extended plunger (state: door closed, guard locking not active). The output OUT D remains set also with guard locking active.|
|LED State||Status LED|
|LED DIA||Diagnostic LED|
|LED 1 rd||freely configurable|
|LED 2 gn||illuminates when door is closed|
|OUT||Monitoring output (semiconductor)|
|OUT D||Door monitoring output (semiconductor)|
Due to two redundantly designed semiconductor outputs (safety outputs) with internal monitoring suitable for:
Important: To achieve the stated category in accordance with EN ISO 13849-1, both safety outputs (OA and OB) must be evaluated.
|Safety switch housing||Die-cast aluminum|
|At UB = 24V DC||-20 ... 55 °C|
|Degree of protection||IP67 (Screwed tight plug connector/mating component)|
|Resilience to vibration||In acc. with EN IEC 60947-5-2|
|Mechanical life||1 x 106|
|Installation orientation||Any (Preferably head downward)|
|Degree of freedom|
|Ready delay||10 s|
|Switching frequency||max.0,5 Hz|
|Connection||2 plug connectors M12, 5 and 8-pin|
|Approach speed||max.20 m/min|
|Guard locking principle||Closed-circuit current principle|
|Locking force Fmax||6500 N|
|Locking force FZh||5000 N (FZH = FMAX/1.3)|